我们检测到您所在位置不属于 China.
您希望:

行业洞察力

我们的使命不仅仅是销售产品,而是提供解决方案来应对客户在我们所服务的每个市场中所面临的独特挑战。

行业洞察

我们成功基于客户的成功,当我们交付能够帮助客户取得成功的解决方案时,我们乐于分享这些故事。请阅读一些来自众多行业的成功故事,了解我们如何利用专业知识和能力来帮助您克服下一个电源挑战。

Reference Guide

Data Centers Quick Reference Guide

Consistent, constant power is mission critical for data centers, but your UPS system is only as good as the batteries that sustain it. We offer scalable high-energy density storage options, cabinets and racks to support your essential infrastructure.

阅读全文

Reference Guide

Quick Reference Guide

EnerSys® delivers the most effective, powerful and reliable batteries available. With a full range of racks, cabinets and accessories available, a complete integrated system can be offered for any application.

阅读全文

Whitepaper

Implementing Nanogrid into the Critical Facility

Operators are looking at introducing nanogrid architectures into critical facilities to maintain reliability in the face of increased thermal loading and to eliminate points of failure. Nanogrid architectures will further enable the use of distributed energy resources (DERs) such as wind or solar to supplement utility power, allowing operators to realize additional cost benefits by avoiding peak usage utility rates or selling power back to the grid.

阅读全文

Whitepaper

The Benefits and Challenges of Deploying 5G Small Cells on the HFC Strand Network

Cable operators are deploying small cell radios through their existing HFC network infrastructure to offload data and associated costs of offering mobility services through a mobile virtual network operator (MVNO) arrangement. Attaching small cell radios to the existing HFC network enables rapid deployment at a fraction of the cost and time as traditional deployment methods.

阅读全文

Whitepaper

Advanced Communication Energy

Advanced Connected Energy is a technique which embeds a low energy communication device into a lead-acid battery to communicate via Bluetooth® Low Energy to a smartphone app, SDK, or controller. The chip provides real-time access to performance when the battery is in service as well as charge status while the battery is stored in a warehouse.

阅读全文

Whitepaper

Understanding Fault Managed Power

In 2020, operators, manufacturers, and industry standards bodies began to investigate the potential for a new distributed power technique that could deliver more power in a safe environment for technicians and the public. A new distributed powering technique called fault managed power was developed imposing no power limit under normal operation, but precisely limit energy transferred under a fault condition to mitigate shock and fire hazard.

阅读全文

Industry Article

Powering PON with conventional cable broadband equipment

Billions of dollars of public funding are being allocated to expand high speed broadband connectivity into unserved or underserved parts of the rural US and Canada. One of the most common methods for expanding the network is through passive optical networks (PON). PON remote optical line terminals (R-OLTs) – located in remote service areas – distribute fiber connections for homes and businesses.

阅读全文

Article

Getting the Most Out of Your Batteries

As expectations on network runtimes grow, and while utility outages become more frequent, multiple-system operators (MSOs) should review their deployed battery backup solutions. The challenge facing network operations is how to safely and cost-effectively increase energy densities across the hybrid fiber-coax (HFC) network.

阅读全文

Article

Extreme Weather—Is Your Network Vulnerable?

Pressure is consequently growing on multiple-system operators (MSOs) to solidify their distributed hybrid fiber-coax (HFC) networks against more significant power outages by extending runtimes. While longer runtimes at any HFC network site can be achieved by adding generators, batteries, or both, it is not always that simple

阅读全文

Whitepaper

Focusing Stored Energy Where It Matters Most

We have charted a course to meet future bandwidth needs with the 10G initiative, and new mobility offerings are leveraging the HFC network to ensure connectivity while on the go. With all of this, it has never been more important to have reliable power to keep the network up and running.

阅读全文

Whitepaper

Keeping the lights on

Next-generation PON implementations will likely include high speed coherent optic links from headends to new OSP aggregation nodes, enabling even faster services to extend deeper into the network. Each active optical component in our PON architecture requires reliable, uninterrupted power to keep the network running.

阅读全文

Case Study

Ensuring Power Continuity for KEK

The battery room replacement and overhaul project at the Kosovo Energy Corporation (KEK) stands as a testament to the pursuit of power infrastructure excellence. In this initiative, EnerSys®, in collaboration with EXBATT, successfully implemented their state-of-the-art PowerSafe® SBS XL 2 Volt batteries, revolutionizing KEK’s power capabilities.

阅读全文

Article

Prospective Stable Grid Float Use Cases

Having sufficient battery power back-up in non-cyclic stable grid float applications is essential across a diverse array of different application scenarios.

阅读全文

Article

Ensuring HFC Network Resiliency During Extended Utility Outages

This paper explores various extended run time solutions using both Lithium Ion (Li-ion) and Thin Plate Pure Lead (TPPL) batteries.

阅读全文

Article

Evolution in Battery Energy Densities

For decades stable grid energy storage applications have often been addressed by using either Valve-Regulated Lead-Acid (VRLA) gel tubular OPzV or flooded OPzS batteries. In a modern context, however, the drawbacks of OPzV and particularly OPzS technologies are becoming increasingly clear - and the time has now come for implementing changes

阅读全文

Article

Addressing the Energy Capacity Shortfall

In an increasing majority of standby float (stable grid) applications, there are expectations to ramp up energy storage capacities. In existing battery deployments, this must be done without extra space needing to be assigned for accommodating racking, etc. Across the board, higher density battery solutions are being called for.

阅读全文

Opinion

Achieving Greater Energy Autonomy at Data Centre Sites

With many data centre operators trying to attain carbon neutrality, they need to explore more sustainable ways of keeping up with their ever-increasing energy demands.

阅读全文

Opinion

Using Data Centre Resources to Support Grid Stability and Peak Shaving

There is considerable potential for data centres to employ their UPS battery assets in a grid support context to reduce running costs.

阅读全文

Opinion

The Benefits of Running Your Data Centre Operation with Reduced Cooling

TPPL batteries are an attractive option for data centre operators looking to run their systems at heightened temperatures and reduce their costs.

阅读全文

Article

Selecting Batteries That Support Data Centres’ Environmental Goals

There are growing concerns about the data centre sector's effect on the environment. Operators must prioritise this when specifying UPS batteries.

阅读全文

Article

The Role of Data Centres in Maintaining Grid Stability

Greater importance is being put on renewable alternatives and changing the emphasis in the power distribution network.

阅读全文

Article

Maximizing Battery Circularity

Batteries have a vital part to play in the continued running of data centres, when they come to their end-of-use, efforts must be made to dispose of them in the correct manner.

阅读全文

White Paper

The Next Era For Standby Float

The demands of customers involved in standby float (often referred to as stable grid) applications are ramping up dramatically. Here a float charge is used to constantly maintain the batteries in a full state of charge (SoC) condition – so that they are ready to respond to any interruptions in the mains supply, should that occur, and the connected load can still be supported. In the past, it was mainly the lifespan of batteries that mattered for such applications. Now, expectations are being raised in relation to other properties.

阅读全文

Article

Extended Runtime: How Will It Affect Your Network Infrastructure

The cable broadband network has evolved from being a vehicle for the provision of entertainment services to become a strategic element of the country’s infrastructure, providing broadband internet access to both homes and businesses. Without appropriate backup measures in place, however, network availability is only as good as the utility grid that powers it.

阅读全文

案例研究

EnerSys 给帕克太阳能探头供电

帕克太阳能探头航天器将以每秒 125 英里的速度飞行,穿过太阳大气层,接近我们的恒星表面 380 万英里。 由于它可以承受高达 2500℉ 的温度,因此探头将从太空捕捉太阳的详细测量数据。

阅读全文

案例研究

利用 TPPL 先进技术给变电站提供支持

利用 TPPL 先进技术给变电站提供支持

阅读全文

白皮书

远程线路电源的规划和工程指南

这种向分布式网络发展的趋势导致越来越多地使用远程线路电源(RLP)作为为远程设备供电的替代手段。

阅读全文

案例研究

戴姆勒通过 ACE® 将电池故障降到几乎为零

戴姆勒需要一种储备容量更高、起动功率更大、寿命更长、可靠性更高、维护成本更低的电池,以满足当今不断变化的驾驶员需求。

阅读全文

白皮书

减少回路的电力

将 DSLAM 部署到网络深处可减少 DSLAM 和最终用户之间的铜缆数量。 像这样缩短或减少铜缆回路以提高带宽交付的程序被称为回路减少程序。

阅读全文

参考指南

快速参考指南

EnerSys 是全球工业应用储能解决方案的领先者,致力于为全球客户生产和销售备用电源电池和动力电源电池、电池充电器、电力设备、电池配件和室外设备机箱解决方案。

阅读全文

行业文章

小型蜂窝未插入

从 ISE 杂志到华尔街日报,小型蜂窝都是正在改变无线网络的新闻焦点技术。 室外小型蜂窝用于提供网络密度,这意味着需要增加更多的蜂窝位点以增加网络容量,以及在大蜂窝未有效达到的区域进行覆盖。

阅读全文

案例研究

NexSys® 电池和充电器系统按计划工作,以超越生命周期预期

NexSys® 电池采用专有的薄板纯铅(TPPL)技术,这种技术使其具备了高能量密度、几乎免维护的特点,是机会充电和快速充电的理想选择。

阅读全文

技术文章

TPPL 技术 - 过去和未来

薄板纯铅 (TPPL) 是一种成熟的电池技术,广泛用于各种不同的应用场合。 从中受益的众多行业部门包括数据中心、电信、运输、物料搬运和物流。

阅读全文

案例研究

医用案例研究 - 心脏泵送强度

患有慢性心力衰竭 (CHF) 的患者的心脏泵送强度要弱于正常人。 植入式设备为心脏输送电脉冲,以减轻慢性心力衰竭造成的影响身体机能的症状。

阅读全文

白皮书

现代中心机房中智能监控的优势

在这个通信和数据分析无处不在的时代,为电源网络添加智能监测和控制是很早就该完成的事情。

阅读全文

案例研究

借助 EnerSys® 的 NexSys® 电池, Sledd 团队实现顺畅运营

NexSys 动力电池系列具有快速充电功能且几乎免维护,能够显著提高运营效益并在整个使用寿命内节省成本。

阅读全文

案例研究

Tampa 市

Alpha Strand-Mount 网关 (SMG) 让您可以获得清洁、可靠、冗余的电力和高速宽带,从而轻松部署距离 AlphaGateway SMG 最远 100 米的小型蜂窝无线电。

阅读全文

白皮书

为 IDAS 网络供电

室内分布式天线系统 (IDAS) 网络的出现大大提高了体育场馆、会议中心和酒店等公共场所无线服务的容量和覆盖范围。

阅读全文

白皮书

无源光纤局域网

POL 是无源光纤网络 (PON) 的衍生品,用于电信服务提供商部署的成功光纤到户架构中。

阅读全文

案例研究

售后市场制造商使用 NexSys® PURE 电池降低电池维护成本

汽车和 RV 售后市场制造商使用 NexSys® PURE 薄板纯铅 (TPPL) 技术降低电池维护成本

阅读全文